It can be used for analog electronics circuit board simulation in the microwave radio frequencies range. This electronics circuit board design software contains 3 tabs- the project tab, the element tab and the layout tab. In the project tab, design notes tab can be written down in the project option you can see frequency tab, schematic tab, global units, interpolation/passivity. The frequency tab contains list of radio frequencies where one can change and modify frequency range for the circuit simulation eg 8GHz for microwave circuit simulation. The schematics/diagram tab you can change show/hide label, hide units, names, parameters and equation. In the global tab, you can set unit measures such as GHz for frequency, resistance unit ohm, power unit mW, inductance units, capacitor units and others. In the system diagram tab you can build the overall system diagram and simulation such as transmitter/receivers block diagram. The electronics circuit board schematics tab allows to set up and edit schematics. The em structure tab allows to set up a simulation on geometric structures. The output equation can be used to set up equations such as S-parameters. The graph option can be used to set up the graphs you want such as smith charts. The wizards tab can be used to create filter, load pull, symbol generators and others.
As an example of application of AWR is design and simulation of communication system which uses QAM modulation, QPSK modulation, FSK modulation etc. Here you can design and simulate the component required for the transmitter and receivers electronics circuit board such as the modulators, RF mixers, power amplifiers and measure the S-parameters, perform impedance matching and other analog design measurement.
DMCA complaint removal
Tidak ada komentar:
Posting Komentar